Comparte
Ver el tema anteriorIr abajoVer el tema siguiente
avatar
♕ Dr. Signa - Fundador
Mensajes : 12138
Puntos : 17380
Inscripción : 24/04/2012
Masculino
Ver perfil de usuario

Treble Bleed Mod

el Sáb 16 Jun - 13:56
Reputación del mensaje :100% (2 votos)
Es un mod sencillo pero funciona.

¿Que hace? cuando bajas el volumen de tu strat, generalmente el agudo se va, este sencillo mod, permite bajar volumen compensando el agudo



This mod uses a 100K resistor in parallel with a 0.002uF capacitor. Those parts are very easy to get hold of, and are perhaps the easiesy to get hold of out of all these mods, as a 100K resistor is a very common electronic part, as is a 0.002uF cap (that’s 2nF or 2000pF, and a very common alternative is 2.2nF or 2200pF). Look for polyester film or ceramic capacitors in those values… BUT I feel this mod is less than ideal, so don’t be tempted just because the parts may already be in your tin/box of spare electronic parts, as the parts for the other 2 mods are still easy to get hold of from Maplin, Mouser or any other electronics parts supplier.

One of the main problems with this mod is that the 100K resistor is in parallel with the part of the volume pot that’s blocking the audio signal when your volume is turned right down. Because of this it will alter the taper of your volume control quite a lot and for that reason the Kinman mod is a better choice.
avatar
♟ Mooer
Mensajes : 86
Puntos : 336
Inscripción : 26/04/2012
Ver perfil de usuario

Re: Treble Bleed Mod

el Sáb 16 Jun - 15:50
exelente dato !!!!!!!!!!!
Ver el tema anteriorVolver arribaVer el tema siguiente
Permisos de este foro:
No puedes responder a temas en este foro.